Tissin Smart Valve Positioner TS900 Series for Control valve Quick and easy auto calibration

product description

Intelligent valve positioner TS900 is from the control room or signal generator and other current output device, accept 4-20mA DC current signal, adjust the air source pressure input to the valve actuator in proportion, adjust the valve opening adjustment device. Through the built-in central processor can be set automatically, PID control, HART communication and other powerful functions.

Specification

Feature

• LCD and 4 buttons
• Quick and easy automatic setting
• Partial Trip Test Function (PST)
• Fault alarm function
• Built-in auto/manual switch knob
• Self diagnostic function
• IP66/NEMA4X protection level
• Large flow pilot valve is adopted to speed up valve action
• Shock resistance, seismic design

Application field

• The TS900 series is mounted on regulator valves for industrial fluid control field applications
• Oil and Gas
• chemical
• Power plant
• The paper
• Water treatment
• The pharmaceutical
• Printing and dyeing processing
• Food and beverage
• othe

1. the shell

2. LCD screen  

3. Key protection cover  

4. Buttons   

5. Junction box cover  

6. feedback pole  

7. Ground terminal  

8. Electrical interface

9. Body drain

10. Automatic/manual switch

11. Air source input interface

12. Pilot valve exhaust cover

13. Outlet 2 Pressure gauge

14. Outlet 1 Pressure gauge

15. Pilot valve outer cover

16. Air source output interface 1

17. Air source output interface 2

action principle

TS900 receives the current signal of the control room (4-20mA), the displacement change of the valve stem drives the resistance change of the potentiometer, and the central processing unit (CPU) on the circuit board The two signals are compared and the control instructions are transmitted to the torque motor (IP converter), which converts the instructions into a pressure signal to adjust the output pressure of outlet 1 and outlet 2 of the pilot valve to control the opening of the valve.

Note: before installing the product, please confirm whether the valve and actuator meet the site requirements. If the installation status is not correct, the adjustment performance of the product will be reduced.