Differential Pressure Gauge
Digital Pressure Gauge
Stainless Steel Pressure Gauge
Precision Pressure Transmitter
Programmable Logic Controller
Float Level Switch
Pneumatic Valve Positioner
Temperature Transmitter Sensor
Hart Field Communicator
High Accuracy Flow Meter
Submersible Water Pump
Pressure Transmitter Manifold
Ultrasonic Level Meter
Voltage Current Power Meter
480V Micro Differential Pressure Switch Dwyer 1910-00 1910-0 1910-1 110 Psi
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Media||Air And Non-flammable, Compatible Gases||Temperature Range||-30 To 180°F (-34 To 82.2°C)|
|Pressure Range||45" W.c. (11.2 KPa||Weight||1 Lb 4.5 Oz (581 G)|
|Switch Type||Single Pole Double Throw (SPDT)||Connector Connection||1/8" FNPT|
480V Differential Pressure Switch,
Differential Pressure Switch Dwyer 1910-00,
480V 110 psi Pressure Switch
Dwyer1900 Differential Pressure Switch Ultra Micro Differential Pressure Switch 1910-00 1910-0 1910-1
1900 Series Compact Low Differential Pressure Switches
Set points from 0.07 to 20 inches of water with repeatability within 3%
Our general range of products, combined with advanced design and construction, enables it to do the work of many large, expensive switches of the same kind. Designed for use in air conditioning systems, it can also be used in equipment such as fluids, refrigeration, ovens and dryers. For air and non-flammable compatible gases, the 1900 Series switch set point range is from 0.07" to 20" (1.8-508 mm). The set point is easy to adjust and the adjustment screw is protected within the housing, this internal location prevents misadjustment. UL, CE, CSA and FM approved.
WARNING: PRODUCT FOR AIR AND COMPATIBLE GAS ONLY
Special models and accessories:
The manual reset model 1900MR includes a special push button switch that automatically shuts off when the pressure rises beyond the range of the set point. When the pressure drops below the set point, it must be reset manually. Add -MR suffix to the range of 1910 when ordering. For example: 1900-10-MR, which is only applicable to ranges such as -1, -5, -10 or -20. There is no UL, CSA or FM approval for this option.
NOTE: The Manual Reset (MR) option is only available for single positive pressure.
A-399 Pipe Pressure Detection Kit - For use with standard and manual reset style switches, includes mounting flange, pipe and fittings.
A-329 Elbow Fittings - Brass fittings for installations requiring right angle connections, two are required for differential pressure measurements.
Explosion Proof Cast Enclosure (CN): Model 1911-CN, Explosion Proof Enclosure, NEMA-7&9; change the base model to 1911 and add the -CN suffix when ordering. Example: 1911-1-CN.
Explosion Proof Enclosure (EXPL): Brass-covered cast iron body, rated Class I, Div.1 & 2, Groups D; Class II, Div.1 & 2, Groups E,F,G; Class III and NEMA 7, 9 NEMA 3. Weight (7 lbs.). The switch must be factory assembled. Add -EXPL suffix to 1911 when ordering. Example: 1911-1-EXPL.
Weatherproof Enclosure (WP): -16ga steel enclosure with gasket seal (NEMA4, IP66) for use in wet and oily environments. Withstands 200 hours of salt spray test and weighs 5 pounds (2.3kg). Switches must be factory assembled. Change base model 1910 to 1911 and add -WP suffix when ordering. Example: 1911-1-WP.
Media: Air and non-flammable, compatible gases
Temperature Range: -30 to 180°F (-34 to 82.2°C)
Pressure Range: 45" w.c. (11.2 kPa) continuous, 10 psig (68.95 kPa) impulse pressure
Switch Type: Single Pole Double Throw (SPDT)
Electrical Rating: 15A @ 120-480 VAC, 60Hz. Resistance 1/8 HP @ 125 VAC, 1/4HP @ 250 VAC, 60 Hz. In the case of high frequency, the current is 10A
Electrical connections: 3 screw terminals, common type, normally open and normally closed
Connector connection: 1/8" FNPT female thread
Installation orientation: vertical installation, consult the factory for other orientations
Set point adjustment: Internal screw adjustment
Weight: 1 lb 4.5 oz (581 g)
Agency Approvals: CE, UL, CSA, FM
1. who are we?
We are based in Zhejiang, China, start from 2013,sell to Southeast Asia(40.00%),Domestic Market(35.00%),Africa(15.00%),Mid East(10.00%). There are total about null people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3. what can you buy from us?
Differential pressure gauge,Red oil differential pressure gauge,Pressure differential pressure transmitter,Level controller,Float switch
4. why should you buy from us not from other suppliers?
We have excellent and experienced foreign trade team and other teams to provide you with the best and professional services. Our products are sold all over the world as best-selling products and high reputation products. We aim to maintain a high standard
5. what services can we provide?
Accepted Delivery Terms: null；
Accepted Payment Currency:null;
Accepted Payment Type: null;