-
Differential Pressure Gauge
-
Digital Pressure Gauge
-
Stainless Steel Pressure Gauge
-
Precision Pressure Transmitter
-
Programmable Logic Controller
-
Float Level Switch
-
Pneumatic Valve Positioner
-
Temperature Transmitter Sensor
-
Hart Field Communicator
-
Solenoid Valve
-
Control Valves
-
High Accuracy Flow Meter
-
Submersible Water Pump
-
Pressure Transmitter Manifold
-
Ultrasonic Level Meter
-
Voltage Current Power Meter
1/4" BSP Proportional Directional Control Valve Hydraulic VP1008BJ401A00
Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xMedia | Oil, Water, Gas, Air, Liquid | Port Size | 1/4“ NPT Or 1/4” BSP |
---|---|---|---|
Operating Temperature | -40°C ~ +85°C | Pressure | 0.2 ~ 1.0bar, 0.2 ~ 2.0bar, 0.2 ~ 4.0bar (2-wire) |
Product Name | Proportional Pressure Valve | Medium | Oil Water Air |
Name | Hydraulic Proportional Directional Valve | Weight | 1.5kg |
Highlight | BSP Proportional Directional Control Valve,Proportional Directional Control Valve Hydraulic,1/4" BSP proportional pressure regulator |
Our pressure and flow control proportional valves incorporate
advanced spool and balanced-poppet technologies.
Unlike competitor products which rely upon miniature
snap-action seats, our valves provide true stepless
pressure or flow control. The result is smooth high speed
response, low noise, and a long trouble free cycle life.
On-board digital electronics assure maximum flexibility
and ease of tuning for specific application conditions. Self
diagnostics, optional digital displays, and a variety of Fieldbus
interfaces are all benefits of the microprocessor-based design.
Precise closed-loop performance is achieved via internal
pressure feedback (pressure control valves). > Comprehensive range to meet all application requirements > Smooth stepless response for better resolution > Quiet and reliable due to pilot valve operation > Highly configurable for application specific requirements > Short set up time to increase productivity > Digital electronics offers multiple interface possibilities
VP10 series
Proportional pressure valve
G1/4
Reliable proportional I/P and E/P converter
Wide scope of application
High precision
Large Flow
General application protection class IP 65
technical parameter medium: Degreasing compressed air with a filtration accuracy of 5μm Output pressure: 0.2 ~ 1.0bar, 0.2 ~ 2.0bar, 0.2 ~ 4.0bar (2-wire) 0.14 ~ 6bar, 0.14 ~ 8bar (3-wire) flow: Up to 300 l/min Air consumption: <4 bar: typical value at 50% signal is 0.85 l/min >4 bar: typical value at 50% signal is 1.75 l/min Work pressure: At least 0.7 bar higher than the required output pressure Operating temperature: -40°C ~ +85°C When using below +2°C, please consult our technical service department. Installation method: The integral surface mount frame is especially suitable for vertical installation, and 50mm pipe installation parts are also available Response time: <2 bar: less than 0.5 seconds (Depends on the input step signal changes from 10% to 90% and the output signal) >2 bar: 2 seconds, the step signal changes from 10% to 90% Total error: Full scale ±0,5% (Typical related errors include the combined effects of non-linear hysteresis, dead zone and repeatability) Temperature influence: Typical value <0,1% /°C and zero overshoot Air source pressure sensitivity: <full-scale output 0.075% / every 1% change in supply pressure Failure mode: When the power supply fails, the signal drops to the bleed pressure weight: 0.825 kg |
IMI Precision Engineering is a world-leader in fluid and motion control. Building close, collaborative relationships with our customers, we gain a deep understanding of their engineering needs and then mobilise our resources and expertise to deliver distinctive products and solutions.
Wherever precision, speed and engineering reliability are essential, our global footprint, problem-solving capability and portfolio of high performance products enables us to deliver GREAT solutions which help customers tackle the world’s most demanding engineering challenges.
Reliability
We deliver and support our high quality products through our global service network.
High performance products
Calling on a world-class portfolio of fluid and motion control products including IMI Norgren, IMI Buschjost, IMI FAS, IMI Herion and IMI Maxseal. We can supply these singly, or combined in powerful customised solutions to improve performance and productivity.
Partnership & Problem Solving
We get closer to our customers to understand their exact challenges.